There are several types and dozens of brands of audio cables. The choice depends on what one wants to hook up and how concerned one is about sound quality. Generally speaking, 5-7% of the total system cost is considered adequate to be invested in cables. If one’s just listening to background music, news shows, etc., or if sound quality isn’t all that important, one can use practically any cable - even the cheap ones that come packaged with many audio components.
The true audiophile believes that only the best will do, and they will commit the dollars to obtain cables that are not only sturdier, but provide optimum performance of their audio system. You can spend hundreds of dollars for audio cables, audio interconnect and gold plated connectors, but to the audio elitist the price is worth it, not only for the sound quality, but also for bragging rights. Still to many of us, it is hard to justify the added expense for the improved sound quality.
Analog audio cables, audio video cables, audio speaker cable and digital cables are the four basic types of cables that can be used to transfer sound. These cables transfer the audio signal from point A to point B unaltered. You control the amount of Resistance, Inductance, and Capacitance thereby minimizing losses at audio frequencies.
RCA audio cables have one connection for the left audio channel, and one connection for the right audio channel, as they are grouped in stereo pairs. The connections are used for passing analog line-level audio signals between components. You need to use low capacitance, well shielded cables for line level analog interconnects so that interference and outside noise do not drift into the signal.
The most important cables are video cables as very high frequency signals travel through them. Audio video cables provide proper impedance, adequate shielding and solid terminations found with high frequency, and the right type of cable can be critical. So the shielding and maintenance of the proper characteristic impedance need to be aspects of a video cable.
Audio speaker cables are generally quite thick, with two conductors. At the tip they may be tipped with metal pins, banana plugs, spade plugs, or even just bare wire. When connecting it is necessary to ensure closest and tightest possible connection from cable to amp or loudspeaker in order to minimize contact resistance. It is also important to remember that the speaker cable runs should be kept as short as possible and not to loop excess cable as it can potentially increase cable inductance.
A special group of cables is digital audio cables. There are two types: optical and coaxial. Optical cables transmit digital audio signals as pulses of light. Coaxial digital cables look like standard analog RCA cables, but instead transfer digital audio signals. They are typically a single cable, whereas analog RCA cables are usually double plugs, for stereo audio.
Good quality audio cables generally cost around 7% of the total audio system cost and can be chosen from several brands. They can be categorized as analog cables, audio video cables, audio speaker cable and digital cables. Analog cable uses RCA connectors that come in stereo pairs for left and right channels. Video cable carries signals at a very high frequency while speaker cables are generally thicker and have two wires. They should connect to speakers and amplifiers with least contact resistance and should be as short as possible. Digital cables can be either optical or coaxial and carry audio signals in digital form.